Water sample - WHO SHOULD TAKE AND HOW?
The sample holder should use appropriate measuring and sampling equipment and follow the sampling requirements. This information can be obtained from the nearest testing lab, which carries water bacterial and chemical analyzes. The laboratory must be accredited and meet the requirements of the testing laboratory.
Drinking Water Analysis in Tallinn
To order a drinking water analysis, please first set a suitable time for taking the sample and agree on parameters to be examined. Price list (EST)Accredited testing laboratory issued by the testing laboratory Water analysis sheet contains data, the data sampler, sample character, purpose, time and place of sampling and analysis for each of the parameters. Each parameter indicating both the analyzed value of the standard maximum value. Datasheet laboratory confirmed the seal and the signatures of the director and analyst.
Analyze what exactly?Usually, there will need to be analyzed in relation to water quality problems. In urban areas, mostly used for public water supply, scattered settlements on private property but groundwater drilled or dug wells.Therefore, different problems. The public water supply, which typically are installed in the central treatment plant, there is a long suspended solids on the pipeline due to corrosion (rust), and the accumulated sediment. Groundwater is the main troubles of excessive iron, manganese, aggressive gases (carbon dioxide, hydrogen sulfide) content.
The easiest way is to turn your problem a specialist company who advises on the selection of test parameters. It is safest to have the sample tested by an accredited test laboratory Since such an analysis is not cheap, it is economically feasible to choose the minimum necessary.Accredited testing laboratories have an official price list, which is recommended to consult before deciding. It should be noted that only one of the parameters of the analysis of the problem is certainly a little. If, for example, the problem reinforced, only becoming aware of the problem of iron in the solution is definitely not enough.
Very simply, quickly, and with sufficient accuracy to get water from outside of the laboratory analysis of the so-called on-site. Expression process. In order to use kit contains everything needed. Expression Analysis takes only a few minutes, a laboratory analysis is significantly cheaper, and the most important thing - the analysis can be done without any special skills, just by reading the manual supplied with the kit. It also will take advantage of a suitable sample bottle to the laboratory searches and cumbersome.
How to evaluate the results of water testing?
The water used must generally conform to the current drinking water standard in Estonia. According to the needs and desires may impose additional requirements, which are usually more stringent drinking water standards.The standard defines the water contained in the additional exposure limit values. If any of the additive content is greater than the threshold, does not meet the requirements of drinking water anymore, and it must be either cleaned or treated in accordance with the maximum levels of additives to the proper standard.
Water purification and processing of appropriate technology choices can be made based on the analysis of data, however, only a specialist.